Comparison of re-revision rate and radiological outcomes between Kerboull-type plate and metal mesh with impaction bone grafting for revision total hip arthroplasty.

BACKGROUND: This study compared the re-revision rate and radiographic outcomes of revision total hip arthroplasty (THA) using a Kerboull-type acetabular reinforcement device (KT plate) with bulk structural allograft and metal mesh with impaction bone grafting (IBG). METHODS: Ninety-one hips of 81 patients underwent revision THA for American Academy of Orthopedic Surgeons (AAOS) classification type III defects from 2008 to 2018. Of these, seven hips of five patients and 15 hips of 13 patients were excluded due to insufficient follow-up information (< 24 months) and large bone defects with a vertical defect height ≥ 60 mm, respectively. The current study compared the survival and radiographic parameters of 45 hips of 41 patients using a KT plate (KT group) and 24 hips of 24 patients using a metal mesh with IBG (mesh group). RESULTS: Eleven hips (24.4%) in the KT group and 1 hip (4.2%) in the mesh group exhibited radiological failure. Moreover, 8 hips in the KT group (17.0%) required a re-revision THA, while none of the patients in the mesh group required a re-revision. The survival rate with radiographic failure as the endpoint in the mesh group was significantly higher than that in the KT group (100% vs 86.7% at 1-year and 95.8% vs 80.0% at 5-years, respectively; p = 0.032). On multivariable analysis evaluating factors associated with radiographic failure, there were no significant associations with any radiographic measurement. Of the 11 hips with radiographic failure, 1 (11.1%), 3 (12.5%), and 7 (58.3%) hips were of Kawanabe classification stages 2, 3, and 4, respectively. CONCLUSIONS: The findings of this study suggest that revision THA using KT plates with bulk structure allografts could provide poorer clinical outcomes than revision THA using a metal mesh with IBG. Although revision THA using KT plates with bulk structural allografts could set the true hip center, there is no association between a high hip center and clinical outcomes. The relationship between the position of the KT plate and the host bone might be considered more carefully.

Evaluation of biphasic hydroxapatite and ß-tricalcium phosphate as a bone graft material in the treatment of periodontal vertical bony defects - A clinical and digital radiological measurement study.

Aims and Objective: The present study aimed to evaluate 2 bone graft materials, that is, biphasic hydroxyapatite and ß-tricalcium phosphate, in the treatment of periodontal vertical bony defects. In term of attachment level, probing depth and radiographic bone level changes. Also, a new digital method of radiographic assessment was used for measurement of vertical bone defect. Material and Methods: Ten subjects with periodontitis and having two or more vertical bony defects were enrolled in the study. Patients were classified randomly into 2 groups. Group I consisted of the experimental site where defect was filled with biphasic hydroxyapatite and ß-tricalcium phosphate graft and Group II consisted of control site where only the open flap debridement (OFD) was carried out. Clinical parameters were evaluated at baseline, 3 and 6 months; Radiographs were taken at baseline and 6 months after surgery. Results: Overall, by the end of 6 months, biphasic hydroxyapatite and ß-tricalcium phosphate and OFD treatment groups exhibited a significant reduction in probing depth almost by 75% and gain in clinical attachment level at follow-up. In the biphasic hydroxyapatite and ß-tricalcium phosphate group, radiographic bone level gain appeared to be greater than in the OFD group. Conclusion: In the present study, biphasic hydroxyapatite and ß-tricalcium phosphate have shown promising results and have showed reduction in probing depth, a resolution of osseous defects and gain in clinical attachment level when compared to open flap debridement.

Does the quality of residual alveolar bone apical to a periodontal lesion beneath the maxillary sinus play a vital role in preventing the extension of periodontal disease to maxillary sinus? A CBCT-assisted retrospective study.

BACKGROUND: The mucous membrane of the maxillary sinus is sensitivis susceptible to infection or inflammation adjacent to it, which may contribute to mucous membrane thickening (MMT). Residual alveolar bone quality (RABQ) is considered a quality of the remaining bone apical to periodontal defect adjoining to the floor of the maxillary sinus. OBJECTIVE: The current study aimed to analyze the minimum RABQ to prevent the extension of periodontal pathology from reaching maxillary sinus using cone-beam computed tomography (CBCT). METHODS: In this retrospective observational study, 240 sinus exposure CBCT records of 146 patients were evaluated. Patients with at least one sinus exposure were included. RABQ and MMT were calculated using CBCT inbuilt tools. RABQ was divided into four groups based on gray scale values (GSV). Statistical analysis was performed using one way ANOVA and independent sample t-tests. Correlation was completed applying Pearson's correlation coefficient. RESULTS: A significant difference (p< 0.05) was observed between the MMT values of the four RABQ groups. Inverse correlation was observed between mean MMT and GSV values. Mean MMT was higher than pathological MMT range (> 2 mm), with significant differences in groups A and B, where mean GSV values are less than 500. Mean GSV greater than 500 in groups C and D show non-pathological MMT. Prevalence of MMT is 91.4% if GSV is < 500 and 7.5% if GSV is > 500. CONCLUSIONS: Our study suggests that MMT is present if RABQ has GSV values < 500. Maxillary sinusitis and its etiology from periodontal pathology can be excluded based on RABQ adjoining periodontal lesion. Early detection and prompt treatment along with appropriate regenerative protocols can be performed to increase the RABQ. Further microbiological investigation is required to support the present results.

Tratamento de defeito vertical do rebordo através da técnica de enxerto sandwich / Treatment of ridge vertical defect through sandwich grafting technique

O tratamento de defeitos verticais do rebordo permanece como grande desafio de tratamento mesmo nos dias atuais. Nesse sentido, a técnica de enxerto sandwich apresenta-se como uma opção de tratamento para tratar esses defeitos com magnitude de até 8mm, bem como o reposicionamento de implantes dentários mal posicionados. Nesse sentido, abordamos neste trabalho um caso clínico com defeito em altura, cujo manejo ocorreu através da técnica supracitada (AU).

The treatment of ridge vertical defects remains as a major treatment challenge even today. Considering this the sandwich grafting technique is the treatment option to treat these defects with a magnitude of up to 8mm, as well as repositioning of poorly positioned dental implants. So the aim of this paper is to present a clinical case with height defect, whose management occurred through the above mentioned technique (AU).

Transposição do Nervo Alveolar Inferior: Uma alternativa para casos complexos / Lower Alveolar Nerve Transposition: An Alternative to Complex Cases

O tratamento de grandes perdas ósseas verticais na região posterior de mandíbula representa um verdadeiro desafio para a reabilitação com Implantes Dentários, sendo portanto considerada, mesmo na atualidade, um grande desafio aos profissionais da Implantodontia. Sendo assim, apresentaremos a seguir o relato de um caso clínico através da utilização da técnica de transposição do nervo alveolar inferior, como alternativa de tratamento (AU).

The treatment of large vertical bone loss in the posterior mandible represents a real challenge for Dental Implant rehabilitation, and is considered even today a great challenge for Implant Dentists. Thus, we present below the report of a clinical case using the technique of transposition of the inferior alveolar nerve, as an alternative treatment (AU).

Técnica Tent Pole para tratamento de defeito vertical do rebordo / Technical tent for treatment of vertical defects

A técnica Tent Pole apresenta-se como uma opção viável de tratamento que proporciona a correção do defeito ósseo e a instalação simultânea dos implantes dentários. Nesse sentido, abordamos neste trabalho um caso clínico com defeito em altura, cujo manejo do mesmo ocorreu através desta técnica, reduzindo o tempo de tratamento e a morbidade ao paciente (AU).

Tent Pole is a viable treatment option that allows bone defect correction and the simultaneous installation of dental implants. So, in this paper we present a clinical case of height defect, whose management occurred through this technique, reducing treatment time and patient morbidity (AU).

Tissue Engineering for Vertical Ridge Reconstruction.

This article provides an overview of basic tissue engineering principles as they are applied to vertical ridge defects and reconstructive techniques for these types of deficiencies. Presented are multiple clinical cases ranging from office-based dentoalveolar procedures to the more complex reconstruction of postresection mandibular defects. Several different types of regenerative tissue constructs are presented; either used alone or in combination with traditional reconstructive techniques and procedures, such as maxillary sinus augmentation, Le Fort I osteotomy, and microvascular free tissue transfer. The goal is to also familiarize the reconstructive surgeon to potential future strategies in vertical alveolar ridge augmentation.

Simultaneous implant placement and bone grafting with particulate mineralized allograft in sites with buccal wall defects, a three-year follow-up and review of literature.

OBJECTIVES: To assess the relationship between the vertical buccal defect size and the outcome of single-stage (non-submerged) implant placement and simultaneously augmentation of sites with mineralized particulate allograft (Puros Cancellous) using collagen membranes (Ossix Plus). SUBJECTS AND METHODS: Records of 108 partially edentulous patients with localized, buccal bone defects in the posterior maxilla and/or mandible [156 tissue-level Straumann implants, 38 male, 70 female, average age = 46.7 (6.4) years] were used for this study. Sectional CBCT scans were used to evaluate ridge forms before implant placement and after bone grafting (36 ± 2.2 months). The initial vertical buccal wall defect was recorded by measuring the amount of vertical Implant Platform's Rough Surface Exposure (IPRSE) when implants were placed [small (<3 mm), medium (3-5 mm), and large (>5 mm)]. The ridge contour at 36 (±2.2) months was classified into 3 categories [completely corrected (no IPRSE seen on CBCT), partially improved (some IPRSE seen on CBCT), no difference/worse]. RESULTS: Complete defect correction occurred in 66 (61.1%) patients followed by improved ridge contours in 38 patients. Significant differences were observed in the outcome of simultaneous grafting of sites with different pre-treatment vertical defect sizes (chi-square = 69.394, df = 4, P < 0.001). Two graft failures (one needed regrafting) and 2 implant failures were also seen. Treatment was effective in complete correction of 100% and 79.3% of small and medium-sized vertical defects, respectively. Large-sized defects showed only partial improvement in 90% of cases, without any complete correction. Cumulative implant and graft survival was 98.1%. CONCLUSIONS: Single-stage implant placement and simultaneous grafting with mineralized particulate allograft showed promising outcome in correcting small and medium sized vertical buccal wall bone defects (<5 mm).